operating stress
英 [ˈɒpəreɪtɪŋ stres]
美 [ˈɑːpəreɪtɪŋ stres]
网络 工作应力
双语例句
- Being organized also translates into higher productivity because people tend to be more creative when operating under less stress.
良好的组织状态同样会转化为更高的生产效率，因为当操作处在较小的压力下时，人们的工作会更加富有创造力。 - Then, because gushing out of lukewarm water under different operating mode, causes endurance crack of header and tube socket's internal surface under repeatedly thermal shock stress.
而后由于减温水和断口处一定时间内不同工况下的喷溢，致使联箱和管座内壁局部表面在反复热冲击应力作用下疲劳开裂。 - Applied anatomy and operating skills related to the operation for stress incontinence
与压力性尿失禁手术相关的应用解剖和手术技巧 - The results indicate that the elastic operating stress range of a torsional axis is extended greatly by pre-twist process and the main reason lies on surface residual stress.
结果表明，预扭后扭力轴弹性工作应力范围得到极大扩展，其主要原因在于预扭塑变形成的表面残馀应力。 - By FLAC-3D program, the numerical analysis to different operating conditions were done, the additional stress results of underlying stratum were contrasted with those of Boussinesq solution.
采用FLAC-3D软件对不同工况进行了数值分析，并将下卧层附加应力场与Boussinesq解的计算成果进行了对比； - The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.
改性奥氏体锰钢适用于冲蚀磨损、凿削磨损以及高应力磨损等工况条件下。 - An automatic hydraulic leveling system suitable for construction vehicles is presented. Its operating principle, structure of leveling sensors and the design of hydraulic system are discussed in stress.
介绍一种适用于工程车辆的电液自动调平系统，着重分析其工作原理及调平传感器的结构和液压系统的设计。 - It also simulate the temperature field of face slab during construction and operating period, temperature stress and shrink stress of face slab through the whole process.
给出了某面板堆石坝施工期及运行期面板温度场、温度应力和干缩应力全过程仿真分析的结果。 - The contact analysis of tower crane rated operating state was performed and then the stress analysis rules were gained.
对塔机的额定工况进行接触分析，得到其应力分析规律。 - Introduction is made of the operating principle and system makeup of the LCD-2 flowmeter with the stress laid on its typical application in combination with a single-chip intelligent processor.
本文简要介绍了LCD&2型超声波流量计的系统组成及其工作原理，重点阐述了该流量计与单片机智能化相结合的典型应用，同时指出了该流量计在煤炭及相关各部门的应用前景。 - The operating principle, structure, and example of application of a kind of a cleaning machine with pressure block without alternate stress for petrochemical pipe were introduced.
介绍了一种石化管道无交变应力泵头清洗机的工作原理、结构形式和应用实例。 - The stresses of LP turbine blades with different pre-twist shroud angles are calculated at aeroengine operating condition. A stress calculation method for shroud damping surface at assembly condition is presented.
对在工作状态下的某型航空发动机叶冠不同预扭角的低压涡轮叶片应力进行了计算分析，给出了装配状态下叶冠阻尼面应力状态的计算分析方法。 - In this paper, the operating environment with corrosive chemical substance, high temperature and stress of the valve seat of heavy duty engine is analyzed, and the mechanism of wear of the valve seat is discussed.
在分析重型发动机气门座圈所处化学介质、温度、应力等环境条件对材料磨损影响的基础上，介绍了气门座圈的磨损机理。 - Based on the present research on pre stress sensors, the operating principle, structural design, calibration results, main features and usage of the digital intelligent anchor cable pre stress sensor were described in details.
在分析预应力传感器研究现状的基础上，详细介绍了数字式智能化锚索预应力传感器的工作原理、结构设计、计量检定结果、主要特点和应用情况。 - The sixth chapter of the thesis proposes the Z-source ac-ac converter topology, introduces its operating principle, control method, device stress, design method, etc.
本文第六章提出了Z源交流一交流变流器电路拓扑，介绍了其工作原理、控制方法、器件应力，设计方法等。 - Based on the effective measured stress signal, the residual working life of the vane under current operating conditions was evaluated using nominal stress method, the reliable results could be acquired.
基于处理后的有效实测应变信号，运用名义应力法对该工况下的叶片剩余工作寿命进行了评估计算，获得了较为可靠的结果。 - In light of the operating condition, design principle, stress condition and the characteristic of air flow, the cause of fracture and mechanism of primary fan was studied and analyzed in this paper.
从风机叶片的运行工况、设计结构和受力状况以及气流流动的特点等方面，研究和分析了叶片产生断裂的原因和机理。 - By applying the Miner rule, the fatigue operating life of different critical sections of the bogie in arbitrary survival probability and confidence was obtained with stress spectrums that were gained on site.
应用已有的PW200转向架线路实测应力谱，结合Miner准则，得到了各部位在任意给定可靠度和置信度下的使用寿命。 - Directing against the operating condition and tubulature stress calculation, a technical scheme for remedy of the said vibration has been worked out, to install vibration damper for enhancing the rigidness of said pipeline.
针对运行工况和管系应力计算，制定了加设减振装置，提高管系刚度的振动治理技术方案，治理后管系振动明显降低。 - The complex structure of electric cable accessory is calculated by finite element method. In order to improve the distribution of electric field and increase the operating life of electric cable accessory, optimization designing of stress cone shape has been carried out based on the calculation results.
对电缆附件的复杂结构进行数值计算，并通过计算结果对应力锥形状进行优化设计，从而改善附件场强集中部分的电场分布，提高电缆附件的使用寿命。 - This paper presents several measuring methods of the mechanical performances of the large bucket wheel stacker-reclaimer under operating conditions, which include: to calculate the initial stress on the tension rod by loading a lateral disturbance;
通过在工作环境下的几种实测方法测得大型斗轮堆取料机的各项力学性能，即：对拉杆施以侧向扰动推算得拉杆初始应力； - The core of performance prediction is the numerical simulation of operating process which regards the function each other between combustion and flow, and the core of thermo-protection design is ablation, heat-transfer and stress calculation.
性能预示的核心是考虑燃烧和流动相互作用的工作过程的数值模拟，热防护设计的核心是烧蚀、传热和强度计算。也可以用来进行热防护设计。 - There are few researches on the operating room nurses at home and abroad for the degree of fatigue, stress analysis of the source and perception of control.
目前国内外针对手术室护士疲劳程度、压力源与控制感分析方面的研究少有报道，本研究将探讨手术室护士工作疲劳程度、工作压力源和压力控制感之间的关系。 - The strength and stiffness of the main shaft device are verified to meet operating requirements, and the stress distribution of assembly structure is achieved, which provide evidence for the studies of further analysis and improvement design.
验证了主轴装置的强度及刚度是符合要求的，并得到了装配结构的应力分布规律，为结构的进一步分析与改进设计的研究提供了依据。 - According to the requirement to optimize the weld seam of vehicle bracket, we design the tensile test of two pipes, simulate the operating stress in the practical work, and get the rupture force.
针对支架焊缝优化要求，设计了大小管拉伸试验，模拟其在实际工作中所承受的工作应力，并测得其拉断力。 - The wavelet finite element method which takes the wavelet function as a basis set, holds the auto-adapted function, the algorithm with good stability, the operating speed quick and the result precision high; In processing local stress singularity problems, it has the attractive superiority.
小波有限元方法以小波函数为基础，具有自适应功能，算法稳定性好，运算速度快，计算结果精度高；在处理局部应力集中等奇异性问题方面具有诱人的优越性。 - Under some certain operating condition, especially in the stress operating conditions, adopting linear method will bring great errors and can not give reasonable interpretation to some dynamic phenomena even under a small disturbance.
在某些运行条件，尤其是重载运行条件下，即使是小干扰下的动态稳定，采用线性特征分析法也会带来较大误差，甚至不能对某些动态现象和行为给出合理的解释。 - In the forth chapter, which analysis managing risk of inner guaranty company, such as company governess risk, operating process risk, capital risk and stress to apply the inside administration for control the special risk.
在第四章中对担保机构内部风险进行了分析，对公司治理结构风险、业务操作风险、资本金风险、赔付风险等进行了具体的分析和论证，着重强调利用内部管理实现特有风险的控制。 - Then, the stress analysis of heat exchanger in seven operating conditions was done and stress distribution nephogram in each operating condition was obtained. Moreover, strength was checked according to national standard.
之后，本文对换热器在七种实际操作工况下进行了应力分析，得到了各操作工况下换热器的应力场分布情况，并按照国家标准进行了强度校核。 - After processing the operating data and calculating the indicators of reaction time and operating accuracy, the assessment results of drivers 'stress response capability and improvement propose are shown on the window of assessment software.
对数据进行分析处理，计算得出驾驶人的反应时间和操作正确率后，在评估窗口中显示驾驶人应激反应能力的评估结果及相应的提升建议。